EPAS PLASTIC AND CASTING INDUSTRY
• TSEN 1092-1
• DIN 2501
• ISO 7005-1
RASTAS AMBALAJ
COVER SIZE : 100 MM RTS-RSB
COVER HEIGHT : 13,40
OUTER DIAMETER : 103,45
INTERDENTAL DIAMETER : 96,55 min. 97,20 max.
RASTAS AMBALAJ
COVER SIZE : 63 MM RTS-RTB
COVER HEIGHT : 9,55
OUTER DIAMETER : 66,45
INTERDENTAL DIAMETER : 59,25 min. 60,05 max.
ABDİOĞULLARI PLASTİC AND PACKAGİNG INDUSTRY CO.
Automatic filling valve; The bag is equipped with a self-closing valve that facilitates filling. Due to the microperforated woven structure and lamination for air permeability with laminated water and moisture resistant...
ISIN PIPE
COMPOSITE PIPE- Our ISIN PP-R Pipes carries the advantageous aspects of the plastic pipe industry such as; smooth, shiny, hygienic and easy installation. It is an indispensable
ABDİOĞULLARI PLASTİC AND PACKAGİNG INDUSTRY CO.
Silage is a feed obtained as a result of fermentation (souring) of water-richfeeds in an airless environment with the effect of lactic acid bacteria. It is the process of wrapping
ABDİOĞULLARI PLASTİC AND PACKAGİNG INDUSTRY CO.
Bags with a width of 25-85 cm can be produced. It can be produced as overlocked or hot cut. Flexo printing can be done up to 6 colors from roll to roll. It can be packed in bales of 500 and 1000 pieces.
ESKA GERİ DÖNÜŞÜM
HDPE ( HİGH DENSİTY POLYETHYLENE) 3
HDPE ( High Density Polyethylene)
Granular Raw Material
ABDİOĞULLARI PLASTİC AND PACKAGİNG INDUSTRY CO.
There are four channels in the sack to prevent the fresh products from sweating. These channels provide homogeneous distribution of air in the sack.
ABDİOĞULLARI PLASTİC AND PACKAGİNG INDUSTRY CO.
It is used as an intermediatevlayer and insulation material in the construction industry and in every area requiring insulation, thanks to its special raw material composition and its weaving feature that can be used for many years.
ESKA GERİ DÖNÜŞÜM
HDPE ( HİGH DENSİTY POLYETHYLENE) 2
HDPE ( High Density Polyethylene)
Granular Raw Material
ISIN PIPE
WELDING MACHINE - the recommended welding machine and apparatus should be used, welding instructions should be followed. It is necessary to check that the temperature of the heater machine is working at the ideal temperature.