Cogeneration or combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilization of waste heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national electricity grid and a gas boiler for onsite heating. Combined heat and power plants are typically embedded close to the end-user and therefore help reduce transportation and distribution losses. Trigeneration is also the simultaneous production of electricity with heating and cooling loads.

Advantages of Cogeneration

• It is possible to get overall efficiencies up to 90%.
• Thanks to better efficiency and clean fuel, cogeneration is the most environmentally-friendly energy solution.
•  It serves a high-quality power supply to the owner.
• The plant may not be affected in case of any failure thanks to single connection to the grid. (Parallel mod)
• Better efficiency due to no transportation losses.
• Owners do not have to pay taxes on illegal usages.
• Reactive energy and compensation costs decrease.
• Smaller capacity backup generator.
• Reduced dependence on foreign fuel due to high efficiencies.

Customer Benefits

• Length is possible up to 12 mt (40 ‘)
• Easy transportation is available because of the compact frame
• Sound insulation is possible at the desired level
• Thermal insulation is possible at the desired level
• It is resistant to outdoor conditions
• Two or more service doors are available
• Ventilation, lighting, and fire system are up to request
• Certified production BV, T. Loyd) is up to request

Yeterli ısıtma sisteminin olduğu tesislerde buhar kazanı yerine dolaylı buhar jeneratörleri kullanılabilir.

• Dolaylı Buhar Jeneratörü Özellikleri
•   Paketli yapı sayesinde daha az alan gereksinimi
• Büyük buhar ve su hacmi nedeniyle düşük basınç dalgalanmaları
• Geniş buharlama yüzeyi nedeniyle su taşınması yok
• Baca ve yakıt hattı gerektirmediği için ekonomik yatırım
• Hijyenik buhar için paslanmaz çelik üretimi mevcuttur

• Ideal solution for plants that need low capacity and quick steam production.
• Three pass, high efficient steam generators up to 5 t/h steam capacity.
• Smoke tube and water tube constructions.
• CE certifications in accordance with EN 1295/53 and PED 2014/68/EU.

Design and Fabrication

Tasarım ve İmalat

• -Katı / sıvı / gaz ve biyogaz yakıt seçenekleri
• -Yüksek verim, düşük termal kayıplar
• -Optimum ısı transferi ve yağ/baca gazı basınç düşüşü için mükemmel tasarım
• -3 geçişli tasarım ve geniş yanma odası ile düşük NOx oluşumu
• -NDT kontrolleri ve hidrostatik testler
• -Tüm yardımcı ekipmanlarla birlikte teslimat (Opsiyonel)
• -10.000.000 kcal/saate kadar kapasiteler ve o Atmosfer Basıncında 320 C'ye kadar Sıcaklıklar
• -Elektrikli ısıtmaya dayalı kızgın yağ sistemleri çözümleri
• -EN 12952 ve 2014/68/EU uyarınca CE sertifikaları
• -DIN 4754'e göre sistem tasarımı
• 
  
• Kızgın Yağ Sisteminin Avantajları
• -Atmosferik basınçta yüksek sıcaklıklar
• -Isı transfer sıvısı ve kimyasal tüketimi yok
• -Isı transfer sıvısı nedeniyle korozyon riski yoktur
• -Kışın donma riski yok
• -Kısa sürede çalışma koşullarına ulaşın

Deaeration is the process of removing the dissolved oxygen from the boiler feedwater. Additionally, in the deaeration process, the CO2 is also removed. Removal of these two gases is important in boiler feed water as both of the gases promote corrosion in the boiler or steam system.

An additional benefit of a deaerator is the high water feeding temperature to the boiler, so the risk of low-temperature corrosion on the smoke side is decreased and thermal shocks are eliminated in the boiler.