AIPexport Türkiye İhracat İthalat

Şirket : STD TRANSFORMATÖR

STD TRANSFORMATÖR

STD Transformatör, 2009 yılında Adana, Türkiye'de Yağlı Güç ve Dağıtım Transformatörlerinin üretim ve onarım ve bakım hizmeti sağlayıcısı olarak kurulmuştur. küçük ve orta ölçekli güç ve dağıtım trafoları üretimi alanında en saygın ve saygın Türk üreticilerinden biri olmak.

Firmamız tescilli 'STD' markası altında IEC 60076, EU 548, ANSI, BSI, IEEE, NEMA, TS EN 60076, IS:2026 gibi uluslararası standartlara uygun farklı güç ve gerilimlerde çeşitli tiplerde transformatörler üretmektedir. ISO 9001, ISO 14001, OHSAS 18001. Transformatör işinde önemli bir bilgi birikimine ve uzmanlığa sahip olan şirketimiz, kurulduğu günden bu yana kontrol edilebilir ve sürekli büyümeyi hedeflemiş, sunduğu tüm hizmet ve hizmetlerde kalite ve müşteri memnuniyeti odaklı vizyonumuz sayesinde sürdürülebilir bir büyüme kapasitesine sahiptir. ürünler hiçbir taviz vermeden. STD Transformatör, ürün kalitesi ve inovasyon politikaları sayesinde Türkiye'nin öncü trafo üreticisi konumuna gelmiştir ve bugün üretiminin %90'dan fazlasını 38 ülkeye ihraç etmektedir.

Detaylı Bilgi İçin : https://www.stdtransformer.com/

DRY TYPE TRANSFORMERS

GENERAL FEATURES

STD Dry Type Transformers have at least one of the two windings placed in an autoclave mold with epoxide resin at near-zero vacuum values. The other winding can also be cast in class H.

STD Dry Type Transformers have reached a high degree of reliability thanks to the technological developments in recent years. Our production is not limited to E2, C2, F1 standards, but also in accordance with E3 (IEC 60076-16) and C4 (GOST-R), high humidity and pollution rate, low installation up to -60° C. can be used at temperatures Therefore, it eliminates the problems related to fire risks and toxic and harmful substance emissions in case of fire.

As they are made entirely with insulating, flame retardant and self-extinguishing materials, they are completely free of all the restrictions on fire hazard that should normally be applied to flammable equipment.

Oil Immersed Hermetically Sealed Transformer

GENERAL FEATURES

Oil-type hermetic transformers are normally produced with a closed tank equipped with fins that allow expansion during temperature changes. The tightness of the tank is up to 0.5 Bar. This type of transformer is the most used transformer type in the world. In hermetically insulated transformer, oil does not come into contact with air and its electrical properties are not compromised, extending the life of the transformer. At powers exceeding 3150kVA or in a transformer with a radiator, the transformer can still be hermetically sealed by means of a nitrogen pad.

For such transformers, the expansion of the insulating fluid is compensated by the elastic deformation of the oil cooling radiators attached to the tank. Protection against internal faults is provided by a DGPT device: Detection of Gas, Internal Overpressure and Oil Overtemperature.

Oil Immersed Transformer

GENERAL FEATURES

For some applications, the transformer (hermetic or with a tank, wavewall or radiator) has a customized tank design to allow the connection of other components in the transformer cabinet.

These appliances can be a MV or LV circuit breaker or switch. For some markets, MV and LV terminals are designed to be on the side, allowing the transformer to be inspected with the help of the porthole by opening the transformer cover.

Oil Immersed Transformer With Conservator

GENERAL FEATURES

Free breathing transformers are equipped with an under-cover airbag or a casing to allow the oil to expand during temperature changes. Because it is not hermetic, the oil is always in contact with the air. Moisture is blocked by the use of dehydrated salts (aeration) contained in special filters. The tank can be fins or radiators. This design is valid for all powers (especially 4000kVA and above). For higher powers and to avoid contact between oil and air, a rubber separator (rubber bag) or nitrogen pad is used.

Such transformers are equipped with an expansion tank or conservator mounted above the main tank. The expansion of the insulating fluid is balanced inside the housing by the rising oil level. In the conservator, the top of the oil is in contact with air, which must remain dry to prevent oxidation. This is accomplished by removing outside air from the enclosure by means of a desiccant containing silica gel crystals.

Certificate of Conformity Electric

Accreditation Certificate

DIN EN ISO 9001

DIN EN ISO 14001

DIN EN ISO 45001

AOSB AIPEXPORT Adana Endüstri Parkı

Sürekli büyüyen, genişleyen, katma değer yaratan, farklı sektörlerdeki istihdam alanları ile Türkiye'nin istikrarlı büyümesine katkıda bulunan Adana Hacı Sabancı Endüstri Parkı (AOSB), sanayinin yükselen değeri olarak Türkiye'ye güç vermeye devam ediyor.